Establishing Communications
|
Once the drivers are installed, run the executable version of the VC or VB sample application. (The VB
code has a more-developed user interface.) Before any other communications can succeed, the Model 301 needs to be initialized.
Each Model 301 has a unique identification number permanently programmed into the controller and printed on its label. You
will need to enter that number. The driver will then locate the requested device and assign it to the application for as long
as the application is loaded.
If you ever cannot regain access to a Model 301, unplug the USB cable, wait for the hourglass to disappear
(if you see it), then re-plug in the USB cable. This process will re-enumerate the device.
|