updated 6-18-14

The device driver and DLL in this folder
must be used together.

Copy LL_USB2k.dll, LL_USB2k.sys, LL_USB2k.inf,
and LL_USB2k.ini into the same folder, either on 
your diskdrive, floppy, or thumb drive. Connect
the USB cable to the PC and 30x device and let
the installer know where the files are located.

If you are updating, the new version of the driver
must be placed in:
 \YourWindowsDirectory\system32\drivers\
and the DLL must be in the same folder as
your application.

The .INI files belong in your Windows folder.
LL_USB.INI is required for running, but the
M30x_SP.ini file is for user convenience only.